HyEndFed 8 band antenne voor 80,40 (30) 20,17, 15,12 en 10 meter.
Max. Power : 200 WATT PEP SSB, 35 WATT DIGITAL.
Lengte : 40 meter.
Behuizing : Polycarbonaat IP67, 100% UV bestendig.
SO239 Teflon Connector.
Alle bevestigingsmaterialen zijn van RVS.
Alleen op de 30 meterband is in de meeste gevallen een antenne tuner nodig.
Voorzien van compensatie oplossing.
Drukstabilisator ter voorkoming van condensvorming.
Deze drukstabilisator zorgt ervoor dat de druk in de behuizing hetzelfde blijft als de druk buiten de behuizing.
Door deze plug aan te brengen ontstaat er geen condensvorming in de behuizing.
Deze VSWR metingen zijn gedaan in het vrije veld op een hoogte van 10 meter horizontaal.
Gebruikte coaxkabel : Aircell 7 met een lengte van 12,75 meter.
Meetinstrument : RigExpert AA-600.
Reviews
and thanks for the great support from Ron
73 Henk
After my order, the package arrived within a week. After opening the package, I am very impressed by the excellent quality. After my installation I was totally flashed how optimally this multi-band antenna works on the bands.
I can only recommend this antenna system as a long-wire compact to every radio amateur.
vy 73 de DO4TP
I have it is a slopper configuration with the low end at about 5’ and the high end at about 55’.
Well worth every penny in my opinion. Great performance and built to last.
Highly recommended indeed.
72’ - 73’
Jerry - K4KBL
i'm running 2 Endfeds, one monoband for 40meters now for almost exactly one year. The 40m is my favorite, spanned it from the top of the roof (mast for VHF) @ 16m agl down to about 14 meters ending in a tree at the end of my garden. Great performance! Running regularly WSPR-beacon with 200 milliwatts on it and am heard in FK, VK, W6 - to sum it up - all over the world!
For real DX it should be a bit higher, but can't realize this in my situation in a densely crowded city aera.
SWR is perfect, don't need a tuner on the whole band.
The other is a (40)-20-10m-Version, spanned in a 30 degree angle away from the 40m-monoband and this one works great on the band that it's made for - also no tuner required. Can be tuned on 12 and 17 m as well... very good job, will recommend it! 73s, Dirk
So I did a few tests: connected one wsrp transmitter to the hyendfed and another wspr tx to a monoband dipole. Same TX power. After a few hours, I switched these transmitters just in case there is a difference between them. With the reports (exported to excel) on wspr.net I could not see any real difference between the hyendfed and the dipoles (tested 20m, 40m and 80m). So the Hyendfed is equal to a monoband dipole for me.
This happy customer just ordered my 3th Hyendfed antenna :-)
73 Arno - PE1RDP - Veldhoven - JO21QK
I have just got a Flex-3000 with a AL-811 and now I have ordered this same antenna in a 800 watt version. I will never use any other antenna again. I plan on keeping this one for a back up.
Also, I have to highly recognize Ron with this site for his customer service. I had problems in trying to order the new antenna and sent him an email and he responded within minutes with the instructions I needed. Thanks Ron and great customer service.
Jeff/W4JRV
The antenna works very nice and as promised. My hamColleges did`nt believe it first as they listen to me.. GREAT antenna indeed, can fully recomand it.
And a great bonus of all this endfeed antennas: You dont speak any more in all telephones nearby.. Many of my hamColleges are using now this endfeeded antennas too.
Very top quality.
The best wire antenna I never used. Don't hesitate.
72, 73 's de Andre - F5SSI
This is my fifth HyEndFed antenna. I have two low power models for portable use and have owned the 5 band and 80/40/20 models. I have a difficult location to set up dipoles and many folk advised against end fed antennas as being a very poor second option for me to use.
The first antenna I purchased from Ron convinced me that the proper engineering and application of end fed antennas can be remarkably successful.So much so, that I now use the 8 band as my primary antenna. On my antenna analyser, it tests as per Ron's data on this site and on air it is excellent.
I don't have licence privileges for the WARC bands but they are a useful inclusion if ever I upgrade.
Ron always responds quickly to orders and to technical questions about his antennas.
If you want a Swiss Army Knife of antennas, this would get my vote.
Cette antenne remplace une FD4.
Comme d’habitude, les matériaux sont de bonne qualité : boitier en polycarbonate, prise SO-239 avec du vrai téflon, bride et collier en acier inoxydable, isolateur terminale de bonne qualité.
L’expédition est très rapide (antenne commandée le lundi matin, reçue le mercredi soir) et accompagnée d’un numéro de tracking pour suivre son voyage.
Ron est disponible pour répondre rapidement aux questions techniques sur les antennes qu’il conçoit.
Les résultats sont bons malgré une propagation capricieuse actuellement sur les bandes HF.
Le niveau de bruit est parfois plus faible sur cette antenne comparée à une Hy End Fed antenna monobande (essais réalisé sur 21MHz)
Antenne à essayer pour ceux qui disposent d’environ 40m de terrain !
After acquiring a Hy End Fed antenna 4 bands, and a 15m single band model and a 10m single band model later, I again trust Ron to acquire the new model 8 bands.
This antenna replaces an FD4.
As usual, the materials are good quality: Polycarbonate casing, SO-239 socket with real Teflon flange and stainless steel braket, terminal insulator good quality.
Shipping is very fast (order antenna Monday morning, received on Wednesday afternoon) and followed by a tracking number to track it.
Ron is available to quickly technical questions answers on antennas designs.
The results are good despite a capricious propagation on the HF bands actually.
The noise level is sometimes lower this antenna compared to a single-band antenna Fed Hy End (tests performed on 21MHz)
Antenna to try for those with about 40m of land!
73s, David F4EPU