HyEndFed 8 Band Black Clamp

€ 140,08 (Excl. BTW)
Voor EU landen: € 169,50 (Incl. BTW)


HyEndFed 8 band antenne voor 80,40 (30) 20,17, 15,12 en 10 meter.
Max. Power : 200 Watt PEP, SSB.
Lengte : 40 meter.
Behuizing : Polycarbonaat IP67, 100% UV bestendig.
SO239 Teflon Connector.
Alle bevestigingsmaterialen zijn van RVS.
Alleen op de 30 meterband is in de meeste gevallen een antenne tuner nodig.

Voorzien van compensatie oplossing.

Drukstabilisator ter voorkoming van condensvorming.
Deze drukstabilisator zorgt ervoor dat de druk in de behuizing hetzelfde blijft als de druk buiten de behuizing.
Door deze plug aan te brengen ontstaat er geen condensvorming in de behuizing.

Deze VSWR metingen zijn gedaan in het vrije veld op een hoogte van 10 meter horizontaal.
Gebruikte coaxkabel : Aircell 7 met een lengte van 12,75 meter.
Meetinstrument : RigExpert AA-600.




Name: Ari City: Sydney 09 juli 2017 Time: 12:51:41

I use this antenna for quick field operations using Ron's Fiberglass Telescopic Heavy Duty Masts (12,5M) when there are no trees around. Fantastic quality and results! I typically deploy in a straight line approx. 8 meters (26 feet) off the ground at its lowest point and use an antenna tuner for fine tuning. I am very happy with the performance even as low as 80 meters. Highly recommended.

Name: Simon VK3HOT City: Bendigo Australia 15 april 2017 Time: 09:36:46

I have two end fed antennas 40-10 and 80-10 and I can say that even at modest heights these antennas radiate! I had the 40-10 up at 5 meters and easily worked US and Europe stations on 20 and 40. The 80-10 will be up at 9 meters and I anticipate even better results. Overall very impressed with the quality of workmanship, the instructions and the results! I would strongly suggest that you buy one of Ron's antennas, you won't be disappointed.

Name: Helmut Wossog Stadt: Riedering 13 september 2016 Time: 10:13:52

I have ordered some times and Ron is like a swiss watch , fast and in top Quality . When I go for DXing to Lesotho , a US Amateur need a sked on 40 m and I haven´t a antenna for this band , Ron makes that in two day´s and it arrives here before travelling in top Quality also ( QRO typ ) .The last order was the 800W 11,85m 3-bander , all is very well and fast delivery , I can give 5 stars !!!!

Name: PY1SW Cesar Augusto Vieira Santos City: Rio de Janeiro/RJ 30 augustus 2016 Time: 22:26:13

That is my third antenna that I've ordered from The HyendFed company. My first one was a three band antenna to work on 40, 20 and 10 meters. Despite the fact that there isn't enough room to place a dipole or a ground plane antenna at the roof top in my building, I have managed to install the three band long wire antenna, hanging the match box from my apartment window and tying the other end to the downstairs garage roof, using a very light rope. The performance and SWR were better than I had expected for a wire antenna like that, which made me brave enough to order another one with double the size of the first one and which is able to operate in 5 bands (80, 40, 20, 15, 10 meter). Once again I did not expect anything different from my first experience with the three bands, keeping in mind my restricted space, so I installed this second antenna in the same place. Recently I have ordered a new 8-band antenna considering I was so confident with the excellent performance I've got from the three and five bands ones. Considering that this antenna is almost 40 meters long I had to hang it from the building roof top, near its edge, and let it go down until the roof top garage downstairs. The antennas, one at a time, were placed in an angle of 45 degrees in relation to the ground. Using an output power and SWR meter, a Daiwa CN-801HP, I've got 1.1 to almost all bands which made me confident that the antenna performance would be a success. Ron, PA3RK, the owner of the HyEndFed company is always ready to reply to any mail with questions a customer may have and that is another positive aspect that every ham radio operator appreciates. 73, PY1SW

Name: Peter Burke City: Castlemaine Victoria 18 juni 2016 Time: 00:20:44

I have been using Ron's antennas for approximately two years now, and my comments relate to a number of antennas in general, and the new 8 band in particular.

This is my fifth HyEndFed antenna. I have two low power models for portable use and have owned the 5 band and 80/40/20 models. I have a difficult location to set up dipoles and many folk advised against end fed antennas as being a very poor second option for me to use.

The first antenna I purchased from Ron convinced me that the proper engineering and application of end fed antennas can be remarkably successful.So much so, that I now use the 8 band as my primary antenna. On my antenna analyser, it tests as per Ron's data on this site and on air it is excellent.

I don't have licence privileges for the WARC bands but they are a useful inclusion if ever I upgrade.

Ron always responds quickly to orders and to technical questions about his antennas.

If you want a Swiss Army Knife of antennas, this would get my vote.

Nom: David COTTON Ville: JEUMONT - FRANCE 07 mei 2016 Time: 12:47:59

Après avoir acquis, une Hy End Fed antenna 4 bandes, puis une 15m monobande et une 10m monobande par la suite, je fais à nouveau confiance à Ron pour l’acquisition du nouveau modèle 8 bandes.
Cette antenne remplace une FD4.

Comme d’habitude, les matériaux sont de bonne qualité : boitier en polycarbonate, prise SO-239 avec du vrai téflon, bride et collier en acier inoxydable, isolateur terminale de bonne qualité.

L’expédition est très rapide (antenne commandée le lundi matin, reçue le mercredi soir) et accompagnée d’un numéro de tracking pour suivre son voyage.

Ron est disponible pour répondre rapidement aux questions techniques sur les antennes qu’il conçoit.

Les résultats sont bons malgré une propagation capricieuse actuellement sur les bandes HF.

Le niveau de bruit est parfois plus faible sur cette antenne comparée à une Hy End Fed antenna monobande (essais réalisé sur 21MHz)

Antenne à essayer pour ceux qui disposent d’environ 40m de terrain !

After acquiring a Hy End Fed antenna 4 bands, and a 15m single band model and a 10m single band model later, I again trust Ron to acquire the new model 8 bands.
This antenna replaces an FD4.

As usual, the materials are good quality: Polycarbonate casing, SO-239 socket with real Teflon flange and stainless steel braket, terminal insulator good quality.

Shipping is very fast (order antenna Monday morning, received on Wednesday afternoon) and followed by a tracking number to track it.

Ron is available to quickly technical questions answers on antennas designs.

The results are good despite a capricious propagation on the HF bands actually.

The noise level is sometimes lower this antenna compared to a single-band antenna Fed Hy End (tests performed on 21MHz)

Antenna to try for those with about 40m of land!

73s, David F4EPU

Schrijf een review over dit produkt